Account
Inquiry
Your custoemr's got a truck tire blown on a muddy jobsite and they need it off ground fast—that's where this 120W electric jack steps in with 150PSI to lift 3 or 15 tons depending on the model, and it runs off their truck's DC12V battery, so no hauling a separate power unit.
It's a pneumatic-style jack but electric-driven, meaning it uses that 35L/min air flow to push the trip range form 15 to 45cm, and the 350N/M torque wrench actually helps them cinch lug nuts without guessing—most buyers go with the 15T for heavy equipement, but the 3T handles pickups fine.
Reliability comes down to the 15A max draw paired with the 120W motor, which we've seen hold up through back-to-back lifts on construction sites, and it's certified EPA, CS, CE, RoHS, and ISO 9001 so you're covered for export or compliance checks.
One thing you might not think to ask—the max height clears 400mm, which is better than most bottle jacks for high-clearance trucks, but it's not suited for low-slung sports cars since the minimum trip is 15cm.
We usually have stock on teh 15T version, about 50 units or so, but the 3T can run 20 days lead time—confirm when you're ready, and we'll send COA with HPLC purity data and TDS on request.
Anyway, you'll want to specify the torque wrench setting when ordering; it comes preset from factory but we can adjust it to 350N/M or whatever your fleet specs call for.
The MOQ for this model is typically 50 units per order. We can discuss smaller trial orders if you're just starting out.
Lead time is usually 15-20 working days after order confirmation and deposit. It can vary based on current production volume.
This jack is certified with EPA, CS, CE, RoHS, ISO 9001:2000, and ISO 9001:2008. We can send you copies of the certs upon request.
The standard trip range is fixed for this model. For custom ranges, we'd need to evaluate feasibility based on your volume.
Store it in a dry, clean area away from moisture and extreme temps. Make sure the power cord is disconnected and coiled properly.
