Account
Inquiry
We've seen a lot of autoclaves come through, but the 3mm SUS304 stainles steel chamber on these is noticeably thicker than most in this price range — it just feels more solid when you close that hand wheel door, and the safety lock clicks in with a reassuring thud.
You're looking at a working pressrue range of 0.14 to 0.22MPa and temperatures from 126 to 134°C, which is pretty much where you need to be for effective sterilization, and the temperature uniformity holds at ≤±1°C so you don't get cold spots in the load.
The digital display and touch key operation are straightforward enough, and you can set the timer from 0 to 99 minutes or even up to 99 hours and 59 minutes if you're doing longer cycles, though most buyers go with the 50L or 75L for general lab work.
It's not really designed for high-throughput hospital use where you'd need a double-door pass-through — this is more for smaller clinics or research labs that run batches of instruments or cotton goods, and we usually have stock on the 35L and 50L, but the 100L can take 20 days or so depending on the order.
The over-temperture and water lack protection are standdard, obviously, but what you don't always think to ask about is the automatic cool air discharge system — it actually makes a difference in cycle consistency because it prevents air pockets from forming during the heating phase.
6, we supply these with CE and ISO13485 certs, and the 24-month warranty is standard for us, but do confirm lead time if you need a specific model because teh 75L sometimes runs a bit behind the others (usually 2-4 weeks).
The only difference is the chamber volume—35, 50, 75, or 100 liters. All models share the same working pressure range (0.14-0.22MPa), temperature range (126-134°C), stainless steel SUS304 construction, and safety features. So pick the size based on your typical load volume.
It's CE and ISO13485 certified, so it meets medical device quality management standards. We can provide the certificates upon request.
The entire chamber is made of SUS304/AISI 304 stainless steel with a 3mm thickness—not just the outer shell. That ensures durability and corrosion resistance under repeated steam cycles.
For a standard order of 10 units, lead time is typically 15-20 working days. We can adjust if you need faster delivery—just let us know.
Yes, the timer range goes up to 99 hours and 59 minutes, so you can set longer cycles if needed. The default mode is 0-99 minutes, but you can switch to hour mode.
