ENPT15/SNPT15 Electric Drive Pallet Jack with 25AH Battery for Indoor Use

Basically responding to your RFQ for the electric pallet jack — we've gone with the SNPT15, which is the standard lift model, and it's a solid fit for your indoor warehose setup with that 1500kg capacity and 600mm load center.

What it does is cut out the phyiscal strain of manual pallet jacks while keeping that tight turning radius of 1350mm, so your operators can navigate aisles without the usual fuss — the 24V/25AH lithium battery (maintenance-free, by the way) gives us about 4.5km/h travel speed, which is plenty for most shifts.

The drive motor is 0.75kW and the lift motor is 0.5kW on this model, but if you need more vertical reach, the ENPT15 variant has a slightly different lift setup — though for your standdard pallet handling, the 190-200mm max fork height is fine, and fork dimensions (1150x160x54mm) handle euro pallets well.

One thing to flag: the gradeability is only 3% when laden and 5% unladen, so it's not suited for steep ramps or outdoor use — it's strictly an indoor machine, and we usually confirm the floor surfce is smooth before recommending it.

We've got the COA and HPLC data ready, and the net weight is about 155-160kg with the battery installed, which is manageable for most loading docks — the MOQ is 1 unit, and lead time is typically 20 days or so, but check with me on current stock.

So, order details: we're pulling the trigger on one SNPT15 with the 25AH lithium pack, standard fork width of 680mm, and it'll ship via LTL freight — I'll send over the TDS and SDS separately, and we'll need the delivery address confirmed by end of day.