High Pressure Steam Sterilization Equipment with Over-Temperature Protection 0.22MPa Working Pressure

So you've been looking at those vertical benchtop units or maybe the ones with a lower pressure rating, and you're finding they just don't hold up for a busy 3-shift schedule or high-throughput lab—we've seen that a lot, and it's honestly why the JRWS-YDD series with 0.22MPa working pressure exists to fill that gap, because when you're running 15 cycles a day, the extra margin matters.

Basically, we've got three chamber sizes—150, 200, or 280 liters—and they all share the same 440mm, 515mm, or 600mm diameter with a 1000mm depth, which is a bit longer than some competitors so you can actually fit those tall flasks or stacked instrument trays without hurting the airflow, and the temp uniformity stays within ±2°C across the whole load.

What it does is run from 40 up to 134°C with a 0-99 minute timer for both sterilization and drying, but the real reason most buyers pick this over a cheaper unit is over-tempearture protection and the door interlock system—that thing won't let you open up if there's presure inside, and the water shortage detection cuts power fast.

One detail people don't always think to ask: the built-in drying function actually works for real dressing packs and porous loads, not just empty metal pans, and you can spec it with the optional printer for logged batch records (usually 2-4 weeks lead time on that add-on, so plan ahead).

9 or 12KW heating on three-phase 380V 50Hz means it'll pull power, but it also gets to temp faster than those underpowered units, and if you need a different voltge for your facility our company can do the conversion—just let us know the actual supply before ordering.

Lead time form stock is roughly 20 days or so for the standdard model, but if you want the printer or a non-standard door hinge side we're looking at 4-6 weeks, and we usually have the 200L and 280L in steady turnover—confirm with us before placing a large MOQ because demand jumps seasonally.