Account
Inquiry
You're looking at a vertical pressrue steam sterilizer that handles daily grind of lab sterilization—culture media, surgical tools, glassware, even biohazard waste—without breaking a sweat. It basically runs on microcomputer automatic control with a digital display and touch buttons, so you set the temp between 116°C and 134°C, dial in the time from 4 to 120 minutes, and let it do its thing. The self-expanding seal is a nice touch; it keeps pressure consistent across cycles without you having to fiddle with gaskets every week.
Capasity ranges form 35L to 150L, which covers most bench work without needing a separate floor model for bigger loads—power draws between 2.5kW and 6.0kW depending on the variant, and it runs on AC 220V or 110V, 50/60Hz. Design pressure is 0.25MPa, rated working at 0.22MPa, and the temperature maxes out at 134°C for sterilization (design temp is 139°C). Over-temperature, over-pressure, and low water protection are built in, plus a buzzer reminds you when it's done.
Most buyers go with the 50L or 75L for routine hospital or university lab use, but the 120L is better if you're running multiple batches of media or instruments daily. It's suited for research setups, pharmaceutical compounding, or clinical sterilization—not ideal for heat-sensitive items that can't take steam, like certain plastics or powders (those need dry heat). The bolt structure on the door is solid; you'll know it's sealed right every time.
CE certification means it meet European standard for pressure vessels, which is a check for compliance in regulated environments. Stainless steel construction resists corrosion and thermal stress, so you won't get rust flakes or degraded seal contamination in your runs—we've seen cheaper units fail after a year or so. The 35L is a bit tight for big glassware but fine for small batches; the 150L is bulky but handles biohazard waste well.
MOQ is typically 1 unit, but for the 150L we usually have stock—confirm lead time (usually 2-4 weeks). Packging is standard crate with foam inserts; you'll get COA with each unit. 220V models are more common, but our company can do 110V on request (check votage before ordering). Prices vary by capacity, so ask for a quote on the size you need.
We offer six capacities: 35L, 50L, 75L, 100L, 120L, and 150L, so you can pick the size that fits your lab's workload.
Yes, every unit comes CE certified, so you're covered for compliance in most markets.
Our standard MOQ is 1 unit, but we can discuss bulk orders if you need a larger quantity.
Sure—it's a seal that tightens as pressure builds, ensuring a leak-proof chamber without manual adjustments.
The system automatically cuts off heating if the water level drops too low, preventing damage and ensuring safe operation.
