High Performance Pressure Steam Sterilizer 4.5kW 380V for Laboratory and Hospital Use

It's basically a big, serious sterilizer—the kind you'd find in a hospital's central supply or a pharma production line, handling 210 to 310 kilos per batch of instruments, media, or waste. The stroke cycle is under 38 minutes which is pretty good for a 1.5m³ chamber, and it's stainless steel throughout.

You've got a working presure range of 0.07 to 0.22 MPa with temperatures from 105 to 134°C, and it needs a 380V three-phase supply pulling 20 amps at 4.5 kW. The steam source has to sit between 0.3 and 0.6 MPa, compressed air at 0.5 to 0.8 MPa, and yeah, water consumption is 400 kg per cycle plus 80 kg of steam—so you're not plugging this into a standard lab tap. It's got an LCD display, an ultra-high temperture alarm, and it records and prints sterilization info.

Not ideal for small benchtop work—this thing weighs about 2500 kg and takes up 2250x1500x1950 mm of floor space. Most buyers go with the 380V setup, but you'll need to confirm if your facility's electrcial and steam supplies match the specs (usually 20A breaker and proper steam line).

Lead time is typically 4-6 weeks, though we usually have stock for standerd orders—confirm when you're ready. chamber dimensoins are 1950x750x1050 mm, which matters if you're fitting tall racks or odd-shaped loads.

And one thing you might not think to ask: the control power runs on separate AC220V/50Hz/3A, so you need that circuit too, not just the main 380V. We've seen buyers forget that and scramble for a step-down transformer.