Semi-Automatic Medical Waste Microwave Sterilizer with PLC Control and 6 Log 10 Disinfection Effect

Pricing really depends on volume — a single unit for a trial is around that higher per-unit cost, but if you move to 3-5 machines for a mid-size facility, we can knock off roughly 12%, and at 10-plus units for a network, you're looking at about 20% off the sample price, which is where most buyers end up.

It hits a 6 log 10 disinfection effect at 135°C and 0.33 MPa inside the 304 stainlss steel chamber, with microwave frequency at 2450 MHz give or take 50 MHz, and the 30-minute cycle treats 10 kg per hour — so an 8-hour shift handles 80 kg with just one non-specialized operator running the PLC touch screen.

The whole setup weighs 850 kg and measures 1544 mm by 1140 mm plus height (1930 mm or so with the 350 mm add-on), and it needs 380V, 50Hz, 3-phase power — 8.0 kW total. It's semi-automatic, not fully hands-off, but operator basically loads waste and hits start.

We usually have stock, but confirm lead time — roughly 20 days or so for a first order. our company can adjust the PLC program for your voltge or language if needed, though the 380V spec is standerd for most markets.

It's not for large waste volumes over 10 kg per hour — that would need a higher-capasity model — but for a small clinic or research lab, it's pretty much a zero-emissions solution with ISO and CE certs. Anyway, let me know your quantiy and I'll send a formal quote.