Account
Inquiry
The 2200W heating element gets that 23L chamber up to 134°C pretty fast, and the pulsation vacuum system is what actually makes it work for porous loads or wrapped instruments—without that cold air removal, you'd get cold spots and failed cycles.
We've shipped these to labs in the US and EU pretty consistently, and teh CE, FDA, and ISO13485 certs mean customs usually clears without hassle; we can provide the COA and declaration of conformity with the shipment if your buyer needs it for their qualiy audit.
Lead time is roughly 20 working days or so for a standerd order, but if you need a rush we can sometimes pull it forward—just confirm when you're ready to place, and we'll check stock.
The PT100 sensor gives you tighter tempearture control than a standard thermocouple would, so you're looking at less than ±1°C deviation across the chamber, which matters if you're running 121°C or 134°C cycles for different load types.
One thing that catches people off guard is the manual drainage—it's not a big deal, but you'll need a drain pan or hose connection nearby, and automatic water injection handles the fill side just fine.
Most buyers in the UK go with the 23L over the smaller 18L because of that it fits a standard instrument tray without cramming, and the gross weight of 60kg means you'll want a pallet for shippng, not a courier bag.
Our MOQ for the ATM-23 is typically 10 units, but we can sometimes accommodate smaller orders depending on stock. Reach out to confirm.
Lead time is usually 15-20 working days after order confirmation and payment. If you need it faster, let us know and we'll see what we can do.
Yes, we include CE, FDA, and ISO13485 certifications with each shipment. They’re available in electronic or hard copy upon request.
Absolutely, you can set the temperature anywhere between 115°C and 134°C using the microcomputer control with LCD display. It’s fully adjustable to match your needs.
The ATM-23 uses pulsation vacuum to pull air out before sterilization, which ensures steam reaches all surfaces evenly. It’s automatic and helps improve sterilization consistency.
