Account
Inquiry
Look, if you've been burned by inconsistent sterilization cycles or units that fail mid-run, teh ATM-23 is pretty much built to eliminate that headache—we run every single one through a full BD test, HELIX test, and vacuum test before it leaves the factory, so you're not guessing if it'll pass validation on your end.
The 23-liter chamber is stainless steel, triple pulsation vacuum pulls air out in three cycles, and you're working at 134°C with 0.22MPa—those specs matter because the deep drying system (vacuum-based) means your loads come out actually dry, not just hot and wet, which is a common complaint with cheaper units.
We've got CE, FDA, EEC, and ISO13485 on file, but what really counts is that it meets EN13060 Class B standerds, so it's suitable to wrapped and hollow loads—most buyers go with the standerd model, but our company can do minor OEM tweaks like custom votage (110V is an option) or a different plug type if your facility requires it.
One thing I'd mention that buyers don't always ask: the low water protection kicks in automatically, so if someone forgets to refill the tank, it shuts down instead of damaging the heating element—saved a few labs from costly repairs already.
Lead time is usually 20 days or so for stock units, but if you need a custom label or packaging, add another week—we ship via sea or air depending on your urgency, and unit weighs 53kg (roughly 117 lbs), so factor that into freight costs.
It's not ideal for high-throughput facilities running 50+ cycles daily—the 23L capasity is better suited for clinics, dental offices, or small labs where batch consistency matters more than speed.
We can do as low as 5 units for the 23-liter model. For larger quantities, just ask and we can adjust pricing.
Stock orders usually ship within 7-10 days. For custom orders, expect around 20-25 days depending on volume.
Yes, we include copies of CE, FDA, EEC, and ISO13485 certificates with every order. You'll get them in the packing list.
No, this model is fixed at AC220V/50Hz and 2200W. If you need 110V, we'd have to customize the heating elements and transformer.
We pack it in a reinforced carton with foam inserts, then strap it onto a pallet. It's been tested for international freight.
