Account
Inquiry
Runs off a standdard 300W motor with 1700 no-load rpm and 2000 impacts per minute, ball-type mechanism inside the square drive that's 1/2 inch and 13mm on the chuck. It'll hit fasteners pretty hard — we see these used most for structural steel assembly and heavy equipment repair on site.
Basically, it's made for tightening up lug nuts, suspension bolts, or lag screws in deck framing where you'd kill yourself with a hand tool. We ship it with a color box and carton, usually in dark blue but you can customize the shell color if your order hits the MOQ. Customs clearance? We've got the HS code 84672100 locked in and we include a COA with every export shipment — no issue for UK or EU entry.
Weighs 1.9kg, so it's not featherlight but it's manageable for overhead work, and the 220-240V or 110V versions both run fine at 50/60Hz — just confirm your voltge when you place teh order (lead time is about 20 days or so). The impact mechanism is ball-type, which means it transfers power smoother than cheaper rattler designs, and the no-load speed tops out at 1700 rpm.
What it won't do is drive 1-inch lag bolts into concrete — you'd need a rotary hammer for that, no way around it. But for typical structural and construction fastening, it holds up better than most corded models we've handled because there's no cord to trip over or blow through.
5, we supply directly from factory here in China, so you're getting the unit at a production cost, roughly, and we handle all the import documentation for FOB orders. Most UK buyers go with the 110V option for their job sites, but the 220-240V models are what we push for mainland Europe.
The warranty runs 12 months for any manufacturing defects, and we usually have a small batch in stock ready to ship, though bigger lot orders need about 30 days from deposit. Anyway, just check the COA against your batch spec when it lands — we've never had a mismatch, but it's good practice.
The MOQ for our EW012 is typically 500 pieces, but we can discuss smaller trial orders depending on your needs.
Lead time is usually around 25-30 days after order confirmation and payment, depending on your location and shipping method.
Yes, the EW012 is CE certified. We can also provide RoHS or other documentation if you need it for your project.
Absolutely, we offer color customization for the EW012. Just let us know your preferred color and minimum quantity requirements.
The EW012 ships in a color box inside a carton, which is sturdy enough for export. We can also do bulk or custom packaging if you need it.
