Account
Inquiry
Actually, the biggest thing to know upfront is that this 72V 150Ah LiFePO4 pack weighs a solid 100kg — that's roughly 220 pounds or so, so you'll definetly need a proper mounting frame or a hoist to get it into place, and it's not something you'd casually swap out between application.
But for high-drain industiral setups like AGVs, electric forklifts, or solar storage banks where you're pulling 250A continuous and can handle the weight, teh trade-off makes perfect sense since most buyers go with this over lead-acid because it holds 11040Wh of energy with a cycle life above 3000 cycles at full 100% DOD, which basically means you're looking at years of daily heavy use before capacity drops off.
What might surprise you is the pulse discharge hits 500A for 5 seconds — that's useful for startup surges on motors or compressors — and the charge efficiency sits at 100% @0.5C, so you're not losing much energy to heat; the built-in BMS handles overcharge, over-discharge, and temperature cutoffs, and it's been through CE and UN38.3 for shipping (we usually have the COA and MSDS ready to email).
Packaging-wise, each unit comes strapped to a pallet with foam corner protectors and a thick plastic wrap — we've shipped hundreds of these, and one thing we've learned is to double-check the terminal bolt torque before shipping because vibrations in transit can loosen them slightly. Lead time is typically 20 days or so for standard orders, but we can push to 12-14 if you're in a pinch.
Also, you'll want to keep the charge temperature between 0°C and 45°C — it's not suited for freezing charging conditions, though discharge works fine down to -20°C if you've got heated cabinets. Self-discharge is under 3% per month, so you can leave it sitting for a few months without topping off, but it's always smart to verify the storage temp stays below 40°C.
For ordering, the MOQ is one unit, and we can do OEM/ODM on the label if you need your branding; just provide the artwork and we'll handle the rest. We usually have stock on the standard 73.6V configuration, but confirm lead time if you need pulse-rated BMS tuning or custom connectors.
Our MOQ for this model is 10 units, but we can discuss smaller trial orders if you need to test a few first.
Lead time is about 15-25 working days after deposit, depending on your order quantity and customization requirements.
Yes, we include CE, UN38.3, RoHS, and MSDS documentation with every order, along with the test reports.
The dimensions are 1020*330*240mm, and it weighs 100kg, so make sure your enclosure can handle that size and load.
Store it in a cool, dry place between 0°C and 40°C, and charge it to about 50% capacity every 3 months to keep it healthy.
