Account
Inquiry
If you're setting up an OR or a cleanroom and need something that actually kills airborne pathogens while people are in the room, this is the unit we see most often for that. 2. It handles up to 100 cubic meters of space with an 800 cubic meters per hour circulation rate, so it cycles teh air about 8 times an hour in a typical room—power draw is under 150 watts and noise stays at or below 50 decibels, which is quieter than most commerical HVAC units. 3. plasma density runs form 2.00x10^18 up to 1.66x10^19 per cubic meter (that's a pretty wide range, and the higher end is better for heavy bioburden situations), but what it does is generate a reactive field that breaks down bacteria and viruses on contact without relying on HEPA filters—ozone output stays under 0.1 mg/m³, so it's safe for occupied spaces. 4. Most buyers go with the continuous sterilization mode, which basically means you plug it in and it runs 24/7; we usually have stock, but confirm lead time if you need more than 50 units or so. 5. One thing people don't always ask about is that the plasma density drops off slightly near the walls—you'll want to place it centrally for best coverage, especially in rooms over 80m³. 6. Anyway, when you order you get the unit, a wall-mount bracket (or floor stand if you specify), and the COA showing plasma output and ozone levels—no remote or app, it's all manual controls on the side.
Our standard MOQ for the PM-100M is 10 units per order. If you need fewer, let's talk — we can sometimes work something out for sample orders or small trials.
Yes, each PM-100M ships with the medical device compliance paperwork. We can share the certificate and test reports before you order if your procurement team needs to review them.
For orders of 10 to 50 units, lead time is around 15 to 20 working days after payment. Larger quantities might add a week. We'll confirm the exact timeline when you place the order.
The PM-100M is fixed at the plasma density range of 2.00*10^18/m³ to 1.66*10^19/m³ — it's optimized for continuous sterilization in spaces up to 100m³. We don't offer field adjustment, but the unit automatically maintains effective levels within that range.
Absolutely. The ozone output is capped at ≤0.1mg/m³, which is well below the safety limits for occupied spaces. It's designed for continuous use in patient rooms, waiting areas, and operating theaters without any health concerns.
