Account
Inquiry
Basically, that restaurateur who switched to paper straws after the ban—their suppiler runs your machine to churn out those 200mm drinking straws, hitting exactly 5mm wide strips from teh big jumbo roll without a single miss.
Speed hits 300 m/min, and the round knife holds that 0.15mm precision all day, but we usually push it harder on aluminun foil laminates than on standard kraft—those have a tighter tolerance anyway.
We've got the PLC control from Pausource for the web guide, and it's what your operator dials in within ten minutes of start-up, though the 7.5kw motor means you'll want a three-phase line (roughly 30A or so at 380V).
12 months everything mechanicla, but we had one issue with the magnetic powder tension sensor after about 20 days of heavy shifting on 1000mm unwinds—TUV and CE both passed it without any fluff.
The double-shaft rewinding lets you run interleaved layers between those 600mm rolls, actually stops edges form sticking together; never had a lineup misfeed on the straw former with that setup.
It's not great for thick board above 250g/m²—the round knives chatter a bit, so most buyers with that need stick to shear-cut rigs instead.
It can go down to 5mm, which is great for narrow paper straw production. The precision holds at 0.15mm, so you get clean cuts every time.
We typically require a MOQ of 1 unit for this model. If you're ordering multiple, we can discuss volume discounts—just reach out to our sales team.
Both CE and TUV certificates are included, so you're covered for European safety standards. We'll send the original docs along with the machine.
Lead time is usually 30–45 days depending on stock. The warranty is 12 months from the date of shipment, covering any manufacturing defects.
Absolutely—it handles aluminum foil, PVC, and PE film too. Just keep the slitting thickness between 12 and 250g/m², and you're good to go.
