High Precision Aluminum Foil Adhesive Label Slitting Machine for Non-Woven Paper Straw Production

We've been seeing a lot of demand for this kind of setup lately, and what it does is it handles the full range from aluminun foil labels to non-woven paper straw materials on the same line — the 300 meters per minute top speed is what most buyers look at first, and it really does cut through a production run fast.

precision sits at ±0.15mm, which is tighter than what you'd get from a standard slitter for this type of film, and teh photoelectric web guide actually keeps things form wandering even when you're running at full speed — most people don't think about drift until they see the scrap pile.

You've got two unwind options there — 600mm or 1000mm depending on your roll stock — and the rewinding setup runs two 600mm spindles, so you can do a quick swap without stopping the line if you're careful, but you'll want to confirm your core sizes before we ship.

We usually have the HC-C650 in stock, about 20 days or so lead time, but the larger HC-C1300 might add another week depending on the control board configuration — the PLC touch screen is pretty standdard now, but the magnetic powder tension control is basically what keeps those thin 12 g/m² non-wovens from tearing.

The 7.5kW motor is enough for the full web width, though if you're running heavy adhesive labels all day you might find it drops a little below 300 m/min on the thicker stuff — anyway, it's not really suited for rigid plastics or anything over 250 g/m², so keep that in mind.