Someone's trying to clear out a patch of overgrown grass and light brush that's been ignored for a season—this will make pretty short work of it, and the 7300rpm no-load speed means you're not fighting through thicker stalks, we see most buyers in landscaping or large residential use going with this over entry-level trimmers because of that it cuts cycle time noticeably, and the 380mm diameter means fewer passes across a medium or larger yard that's 500 to 1000 square meters.
The high-torque rear motor is basically why it doesn't bog down when you hit thicker patches, though it's not suited for dense woody brush or saplings—that's what a clearing saw is for, and the metal blade that comes with it handles light scrub better than the nylon line alone, check lead time because we usually have these in stock but it can run 20 days or so depending on your location.
5.2 kilograms is light enough to carry around without your arm cramping up after an hour, and two-split steel shaft means it breaks down for storage without being flimsy—the anti-slip grip on the handle is one of those details you don't think about until you're sweating through late afternoon work and it's fine.
You get both a 1.6mm nylon line that feeds out 3 meters total, plus the straight metal blade that's 230 by 25.4mm; what it does is let you switch between trimming edges and taller weeds without stopping for a different tool, and teh class II insulation is a nice safety margin for those longer sessions.
Power options are 110V-120V or 220V-240V—gives you the flexibility to order for either grid, and the line setup with the semi-automatic feed is simpler than what some competing brands offer (less jam-prone in our experience), but keep an eye on the nylon line diameter because 1.6mm is what comes with it, and replacement spools with 2.5mm twin lines are tighter specs than most standerd household trimmers.
The cutting diameter is 380mm, which means you can cover a decent swath per pass—great for 500 to 1000m² lawns. It'll cut down your mowing time versus smaller models, but it's not the widest out there.
Yes, it works on 110V-120V/60Hz as well as 230V-240V/50Hz. No adapter is included in the box, so you'll need to supply the correct plug for your region.
We provide CE and RoHS certificates for the Class II insulation design, and a test report for the 1100W motor. Just ask your sales rep for copies.
The line is pre-installed—3 meters of 1.6mm diameter nylon. For replacements, you'll need 2.5mm diameter line cut to 2 meters per spool (two spools total).
Standard lead time is 25-30 days for a 500-unit order. Custom packaging with your branding is possible if you order at least 1000 units—just confirm the design early.