Account
Inquiry
It's an automatic pallet strapping machine that wraps straps around loaded pallets vertically—you feed it through the side, and it tensions, seals, and cuts the band in about 8 seconds per strap. Works with PP or PET strapping, so you've got flexibility depending on what you're securing, and the touch screen lets you dial in tension and feed speed without needing a tech.
Most of our buyers are in logistics or beverage plants—think cases of water stacked on pallets, or detergent jugs that need to stay tight for shipping. But it also handles dairy and meat products, basically anything boxed or canned, since the customizable dimensoins let you adjust the arch size to your line. One thing I'd flag: it's not great for irregular-shaped loads that shift a lot.
We've shipped dozens of these, and the 12-month warranty kicks in after it leaves our port—no fiddling with post-sale pushback if something goes wrong early on. Remote support is standard, but we usually have an engineer avaliable for video calls within a day or so.
Ordering's straightforward—pick your band type (PP or PET), confirm arch dimensions you need (roughly 1.2m wide by 1.5m tall is typical), and we'll quote you on a machine that's built to your floor layout. Lead time is about 30-35 days, give or take, since each unit is made to order.
Actually, one detail I always mention: the track inside isn't lined with rubber like some machines, so if you're running thin 8mm strapping, you might need to bump up to 12mm to avoid jams—just a thing we've noticed over teh years.
Yes, the dimensions are fully customizable to fit your line. Just send us your required width, height, and conveyor specs, and we'll adjust the frame and strapping head accordingly.
Absolutely. You get remote control guidance plus over-engineer support — we can walk your team through setup and troubleshooting via video call, no extra charge.
It's 12 months from the shipping date. If there's a delay in installation, let us know and we can often adjust the start date a bit.
It's designed for plastic strapping only, typically PP or PET. Steel strapping would damage the sealing mechanism, so stick with plastic.
Yes, we can include a CE certificate and material compliance paperwork upon request. Just mention it in your order, and we'll pack them with the wooden case.
