Account
Inquiry
Lead time is typically stock avaliable—we ship within 3-5 working days, but for anything above 240mm² or odd sizes you'll probably want to confirm first, it's just not always on the shelf.
These are cold-pressed copper-aluminum lugs, so don't expect them to hold up in high-vibration environments like a crimped copper-only terminal would, but for standerd power panel connections or distribution boxes they do the job fine (usually 10mm² to 500mm² range).
Suface is tin-coated—that's what gives it the silver look—and it handles -55°C to +150°C, which covers most outdoor substation work and industrial gear we see.
We run them to IEC61238-1 and NFC33-090-1, and the COAs come with SGS and CE marks; cold pressing means metal bond is consistent, no air pockets in the joint.
The pure T2 copper with aluminum bit is basically the whole point—it lets you join copper wire to aluminum busbars without galvanic corrosion, just keep the wire clean before you compress it.
They come loose in a carton, about 50 to 200 pieces per box depending on the gauge, and MOQ is one carton—nothing special, but nobody complains about that.
Yes, we cover the full range from 10mm² up to 500mm², so 240mm² and 300mm² are both available. Just let us know the exact size you need.
Our standard MOQ is 100 pieces per size, but we can sometimes negotiate smaller orders depending on stock. Get in touch for exact numbers.
They comply with IEC61238-1 and NFC33-090-1 standards and come with SGS, ISO, and CE certifications. We can share the test reports with your order.
We do offer limited customization on barrel length and hole size for larger volume orders. Send us your drawing or specs, and we’ll confirm feasibility.
They come in standard cartons, typically 100 pieces per box, and can be palletized for bulk shipments. Stored in a dry, cool place, the tin coating keeps them corrosion-free for years.
