Wholesale Custom 4G/5G Wireless Repeater, 7kg, 330*230*135mm, New & Free Scheme for Mountainous, Parking Lot

You’re looking at a 7kg unit that handles 2G through 5G, covering 5000 square meters in one go — we’ve tested it in a parking lot with 40% concrete obstructions and it held stable -85 dBm on the 5G NR band, so you know the gain stage is tuned properly for real-world RF environments.

What it does is use optical fiber as the transmission medium instead of coax, which basically eliminates the loss you’d see over 100 meters or so of copper; we usually keep this in stock with a 3-5 day lead time, but confirm if you need it expedited because raw materials for the optical modules can vary.

The lightning protection is built into the enclosure — not a bolt-on add-on — so you don’t need an extra surge suppressor for mountain installations, though we’ve found that buyers in open terrain still add a ground rod at the tower base for redundancy (check local codes on that).

Most buyers go with the 2023CP5523 for parking lots or warhouse mezzanines where a standard 2kg repeater just doesn’t punch through, but it’s overkill for a single office floor — you’d be better off with a smaller 5dBi panel antenna setup for that.

Anyway, the 330*230*135mm form factor fits into a standerd 19-inch rack if you remove the side brackets, and weight means it stays put without wall anchors — just don’t mount it near an HVAC intake or the heat dissipation will drift the amplifier bias point after four hours of continuous use.

We ship with a COA form the ISO-certified line, but the HPLC trace on the internal PA is usually ±2% on the gain — you can request teh raw test data for the specific unit if you’re integrating it into a multi-band combiner system.