Account
Inquiry
If you're packaing big cartons or heavy loads — we're talking waste paper bales, medical supplies, cosmetics cases — this side-seal strapper handles it better than a standard top-seal unit because the strap runs flat against the side panel, which keeps tension consistent on unstable stacks.
The PLC control cuts down on jams, and the welding type joint holds firm even at 80kg tension, so you're not re-strapping every third carton — most buyers go with the 9-15mm PP strap range for flexibility.
We've been building these for a while now, so the arch size is W600xH800mm as standard but our company can tweak it for oddball dimensoins if you send us your carton specs—lead time adjusts accordingly, maybe 20 days or so.
Honestly, the speed is the selling point for high volume: under 2.5 seconds per cycle means one machine can easily keep pace with two packing lines, though it's not ideal for small, lightweight boxes since the side pressrue can tip them over.
The table height sits at 750mm adjustable, voltage is 380V 1.36PH, power 1KW 50HZ, and the whole thing weighs 240kg net—we usually have stock but confirm lead time for motor or breaker warranty parts.
One thing you might not think to ask: the machine is a bit tall for cramped spaces at 1350mm height, and the gross weight with packing hits 260kg, so plan your receiving area accordingly.
The maximum tension is 80Kg, and yes, it's adjustable to fit your strapping needs — just dial it up or down depending on the load.
Absolutely, the arch size is customizable. Let us know your carton dimensions, and we'll adjust it accordingly.
We can provide a CE certificate and a factory inspection report upon request. Just let us know what your buyer requires.
Lead time is typically 15-20 working days, and the MOQ is 1 unit for sample orders. For bulk, we can discuss volume discounts.
It's packed in a sturdy wooden case measuring L1980*W750*H1500mm. The machine comes partially assembled — you'll just need to mount the strap coil and connect power.
