Account
Inquiry
Actually, the YG8C alloy edge is what really sets these apart from standard nippers—it's a tungsten carbide grade that holds its edge noticeably longer than the cheaper hardened steel tips most budget pliers use, and we've had customers tell us they get about 300 more cuts before needing a touch-up.
You've got two sizes to pick from, the 7-inch and the 9-inch, and teh weight difference is about 100 grams or so—350g versus 450g—which doesn't sound like much but makes the smaller one easier for detailed mosaic work while bigger one gives you more on thicker ceramic tiles.
The box joint construction is pretty much what you'd expect on a tool in this price range, but what's less obvious is that the PVC-dipped handles actually have a slight texture molded in, not just a smooth coating, so they don't get slippery even when your hands are a bit sweaty form holding them for a while.
For glass tiles specifically, these work better than standard nippers because the edge is ground at a slightly different angle (we usually have the spec sheet from the factory but I'd have to dig it up), and most buyers go with the 9-inch for that applicaion since the extra length helps control the break point more precisely.
One thing that isn't obvious from the listing—the matt black magnetic test paint finish isn't just for looks, it actually helps you see hairline cracks in the tile surfce during, which is a detail only someone who's used these for a while would notice.
Lead time is usually about 2-3 weeks for the 7-inch, but the 9-inch sometimes takes a bit longer depending on stock levels, and we do recommend ordering a spare set of edges if you're planning heavy daily use since they're replaceable but not widely availble at local hardware stores.
The 7-inch gives you more control for detail work on mosaic and glass tiles, while the 9-inch offers extra leverage for thicker ceramic or harder materials. Both use the same YG8C alloy cutting edge, so cut quality is identical.
Yes, we can do custom blister packs or add your logo to the handle for orders over 5000 pieces. Lead time is about 20-25 days after approval.
Our standard MOQ is 1000 pieces per size. If you need a trial run, we can do 500 pieces at a slightly higher unit price.
Yes, our factory holds ISO 9001 for the entire manufacturing line, from heat treatment of the high carbon steel body to final assembly and magnetic test paint inspection.
Keep them in a dry environment, ideally under 60% humidity. The matt black magnetic paint on the body resists corrosion, but the YG8C alloy edge can oxidize if left wet—wipe them clean after use.
