Account
Inquiry
Basically, if you're equipping an OR where tissue color accuracy matters—and let's be real, when does it not—this LED lamp with CRI ≥97% and R9 over 90 is a solid fit, but it's not meant for field surgery or anything without a ceiling mount, given the 2700mm minimum install height.
We've shipped hundreds of these MCS0354 units, and what stands out is the head temperature rise stays ≤1°C, which your surgical team will actually feel, and the working focus depth of 800-1000mm gives you that deep cavity visibility without the heat discomfort.
The adjustable color tempearture from 3800K to 4800K and spot diameter range of 110-230mm mean you can dial it in for neuro or ortho cases, and the imported LED chips are 100,000 hours—so about 11 years of continuous use, give or take.
All units come with a CE certificte and a COA from our HPLC batch testing, though we usually have stock for 50 units or so, but confirm lead time on larger orders (typically 20 days) since teh touch LCD control interface is popular and we sometimes run short.
It's steel construction with a 90mm dome, and the control is via LCD screen plus knob or touch LCD—most buyers go with the touch version, and honestly, we prefer it too for shadowless effect fine-tuning during longer procedures.
Anyway, the 1W per piece power consumption keeps the electricity bill low, but you'll want to check your OR ceiling height before ordering—that 2700mm minimum is non-negotiable unless you're okay with a compromised light pattern.
You'll need a ceiling height of at least 2700mm for proper installation. Anything lower and the light won't have enough clearance for safe positioning over the surgical table.
Yes, this model is CE certified, and we can share the certificate with your order. We also have test reports for illumination and temperature rise if your hospital's procurement team needs them.
For an order of 50 units, lead time is typically 25-30 working days. This includes production and quality checks. We can expedite to 20 days for confirmed orders with a deposit.
It's thanks to the imported LED chips and efficient heat dissipation design. Each chip uses just 1W, so the light stays cool even at 16,000 lux, keeping the surgical team comfortable during long procedures.
Yes, the steel body is powder-coated to withstand regular cleaning with hospital-grade disinfectants. It won't rust or corrode from standard OR sanitizers, so it's built for daily use.
