ABS Hospital Emergency Medical Trolley with CE ISO Certification for ICU and OR Rooms

We run each unit through a full load test before it leaves the floor—basically stacking the drawers to capacty and rolling it across a simulated hospital corridor for about 50 cycles or so to check for any wobble or wheel drag, and we log every result against the batch COA.

The ABS shell is molded form a single engineering-grade lot to keep wall thickness within 2.8mm tolerance across all panels, and teh 4-inch whispering wheels are individually tested for smooth rotation at 25kg vertical load, so you don't get that squeaking after a few weeks of use in the ICU.

CE and ISO certifications are issued per batch—not just per model—and we include the specific cert numbers on the packing list, but what you probably don't know is we also hold a retest policy for any unit that fails the 72-hour corrosion spray test (usually 2-4 weeks turnaround).

Each drawer face uses same 430*335*110mm hollow mold with 3x3 separators, and the 95mm guardrail is press-fitted rather than glued, which means it won't separate under a 15kg lateral push—something most buyers don't ask about until they're restocking supplies mid-code.

760*475*950mm is the base footprint, and the 7-type five-hook infusion rack adds about 400mm to the height when extended, but we actually recommend confirming your OR door clearance if you have older 1800mm frames because the rack doesn't fold completely flat.

MOQ is one unit, lead time typically runs 15 working days for standerd white, and our company can do a custom drawer configuration if you send over your tray layout—though the 3-liter sharps bin slot stays fixed unless you request a dedicated waste compartment instead.