Account
Inquiry
The biggest caveat with these is the ±5°C uniformity across the chamber—it's not for precision critical glassware but works perfectly for routine hospital and lab loads where consistent heat is the goal.
It basically reaches 250°C with that PT100 sensor holding within ±3°C of your set point, and the over-tempearture alarm is a real safety net if someone accidentally sets it too high.
You've got five capacity options from 55L up to 200L, so pick base on your tray count—the 88L is our most common for general sterilization, usually ships within 20 days or so.
Power is standdard 220V, and the stainles chamber holds up fine with repeated cycles; just note the weight jumps form 45kg to 105kg depending on model, so check your floor load if going large.
CE and ISO13485 are in place, timing runs 1-9999 minutes, and you get two shelves with it—most buyers go with teh 105L for the balance of space versus footprint.
For the 200L model, lead time is typically 15-20 working days after order confirmation, depending on current stock. We can give you a more precise ETA once we check inventory.
Yes, we include both CE and ISO13485 certificates with every unit. Just let us know if you need any additional documentation for your hospital or lab compliance.
Absolutely, we can add more shelves at a small extra cost. The chamber has slots for up to 5 shelves, so just specify the quantity when ordering.
The PT100 sensor is placed in the air duct for consistent readings, and the LCD controller adjusts heating cycles to stay within ±3°C. The ±5°C uniformity means temperature is even throughout the chamber, so your samples get reliable heat treatment.
We pack each unit in a plywood box with foam padding, suitable for sea or air freight. For the 200L model at 105kg, we recommend a pallet base to prevent shifting during transit.
