Account
Inquiry
Most standard indutrial motors can't maintain starting torque past a 760V feed into the circuit design, and what you end up with is heat soak in the windings inside 60 seconds at full draw.
To manage that direct online start better, the squirrel-cage rotor dissipates inrush heat fast when you hit the breaker — it's a solid bar design, basically short-circuit proof for this frame class, which means you can punch it hard from cold.
Insulation class F on standard builds with a 80-280mm frame means thermal overhead at continuous S1 duty, 100% copper windings and the IP55 shell seating tightly enough that dust loads in food processing won't bridge the phase separators; 4-pole constant torque holds pretty well across 50Hz or 60Hz (usually 380V nominal, but 220V up to 760V if you spec the tap configuration on order).
We've had these on agricultural augers in open sheds for 30 days or so at -15°C with no condensation issues in the terminal box — the gasket seal actually sinks tighter below freezing, and MOQ on the Y2 series is 10 units but Y series typically ships same week for stock frame sizes, (check lead time on anything above 200mm).
Also, most buyers ordering for chemicla mixing tend to go with the F insulation and just run continuous duty — it's cheaper than H, though if ambient ambient touches 40°C consistently, switch to the H class or an external fan shroud since shell alone won't shed that much heat.
1000m altitude limit on standard builds, but if you're above that we usually have a derate curve graph form the ISO9001 docs that drops torque by about 1% every 100m — not a hard stop, just a real performance limit for pump drives.
Frame sizes range from 80mm to 280mm. For power tools, smaller frames like 80-132mm are common, but it depends on your torque and mounting requirements. Check your existing motor's frame size for a direct replacement.
Yes, it works on both 50Hz and 60Hz, with the standard voltage at 380V. Just make sure your supply voltage falls within the 220V-760V range. No rewiring needed.
It comes with ISO9001 and CCC certification. If you need specific documentation for import or compliance, just let us know and we'll provide the certs.
Yes, the winding is 100% copper. This gives better conductivity and heat dissipation than aluminum, so the motor runs more efficiently and lasts longer under continuous duty.
For standard Y2 4-pole motors, MOQ is typically 10 pieces. Lead time is around 15-20 working days. If you need a smaller quantity or faster delivery, contact us to check stock.
Quick delivery and excellent packaging. The motor arrived ahead of schedule, which was a pleasant surprise. The outer box was sturdy and showed no signs of damage during transit. Inside, the motor was securely fastened with ample padding, ensuring it was completely protected. This level of care in logistics is commendable and reflects a professional operation. The quality of the motor appears robust at first inspection. The construction feels solid, and the finish is clean without any visible defects. While I have not yet integrated it into a system, the initial build quality inspires confidence for industrial use. The copper windings, as advertised, seem properly installed, which is crucial for efficiency and longevity. Customer service was responsive and helpful during the ordering process. They answered my pre-sale questions promptly and provided clear information. This proactive communication made the purchase straightforward. Overall, based on the logistics, apparent quality, and service interaction, this seems like a reliable product from a trustworthy supplier. The entire experience was smooth and professional.
Upon receiving the motor, the shipping speed was unexpectedly fast. Unpacking the item revealed secure and professional packaging that prevented any transit damage. The overall build quality feels robust and substantial, aligning with industrial-grade expectations. Unit inspection showed clean manufacturing with no visible defects on the casing or terminal box. Unboxing was straightforward, and all specified components were present. Unfortunately, the initial communication regarding the shipment tracking was somewhat unclear, leading to a brief period of uncertainty. Ultimately, the delivery was completed without issue by the logistics carrier. The supplier responded promptly to my basic inquiry post-delivery, which was appreciated. Using standard palletized freight, the motor arrived intact and on schedule. The finish and apparent material quality seem excellent for the price point. Understanding that this is a core component for machinery, the initial physical impression is very positive regarding its durability. Unless operational testing reveals unforeseen issues, this appears to be a solid purchase based on logistics and initial quality assessment. The outer paint is even and the nameplate data is clearly legible, which is a good sign of manufacturing attention to detail. Usually, such industrial items can be a gamble with online purchases, but this transaction seems satisfactory so far. Up until this point, the experience has been largely positive, setting a good foundation for its intended application in a workshop setting.
My experience with this motor was excellent overall. The delivery was incredibly fast, arriving well ahead of the estimated date, which minimized my project downtime. The packaging was secure and professional, ensuring no damage during transit. In terms of quality, the motor appears robust and well-constructed, with no visible defects or issues upon inspection. It feels durable and suitable for industrial applications. Customer service was responsive and helpful, promptly addressing my inquiries about specifications. Although I haven't installed it yet, the initial impressions are very positive. I would definitely recommend this for anyone needing reliable industrial equipment. Great job on all fronts!
Prompt delivery and excellent packaging ensured the motor arrived safely without any delays. The quality is impressive, with sturdy construction that feels durable and reliable for industrial use. Customer service was responsive and helpful, addressing all my queries efficiently. Overall, a smooth experience from start to finish.
