Large Volume Steam Sterilization Equipment with Dynamic Pulse Exhaust and Drying Function

We saw your inquiry about large-volume sterilization equipement and pulled the specs on the BKQ series — the 200L model is our workhorse for bigger loads, chamber runs φ500*1000mm in S30408 stainlss, and the pulse exhaust lets you cycle 0 to 9 times at 105-136°C depending on your load density.

Actually, most buyers with mixed media go for the 150L or 120L units because the pulse exhaust helps with air removal in dense packs, and you can program the dissolution temperature from 60-100°C if you're dealing with liquids that need slow heating first — the holding range is programmable too, 45-60°C or 50-100°C.

The working pressure hits 0.23MPa on bigger models, and the temperture display accuracy is 0.1°C, which matters more for validation than daily use honestly — we usually have stock on the 100L, 120L, and 150L, but the 200L is typically a 4-6 week lead time.

One thing people don't always ask about is the drying function — it's not just a post-cycle dry, it actually pulls a vacuum and holds temperature to get wrapped items dry enough to store immidiately, though it adds about 20 minutes or so to the total cycle for a full 200L load.

Power consumption varies from 4.4KW on the 50L up to 6KW on the 200L, and the supply options are AC110/220V±10% or 380V depending on your facility — just confirm which voltage you'd need because the 380V models have a different heating element configuration.

Anyway, our company can bundle two stainless steel baskets with the 100L or three with the 150L, and the external footprint on the 150L is 650*650*1400mm, so it fits through standerd doorways if you're retrofitting into an existing lab space.