Account
Inquiry
We've had good feedback on this one since we started stocking it — teh 10-inch LCD screen makes the interface pretty straightforward even for first-time users, and that UF accuracy of ±1% or ±10ml/h is tighter than what most single-pump units offer in this range. It basically runs through diaysate flow from 300 right up to 800 ml/min depending on your protocol needs, and the tempearture control holds steady at ±0.5°C across 35 to 39°C.
conductivity is usually set between 12.5 and 15.5 ms/cm for standard treatments anyway, but if you're dealing with a more sensitive patient cohort, the multiple monitoring systems catch air bubbles, blood leakage, and pressure at arterial, venous, and TM points — they'll flag issues before they escalate. So the auto self-test kicks in when you power it up, and it'll automatically prime, rinse, and run disinfection cycles without you hovering over it.
Now, this isn't really suited for high-volume acute settings where you're running back-to-back shifts — the backup battery gives you about 20 minutes or so, enough to finish a session safely, but continuous runtime is what a larger floor model handles better. For a typical clinic with scheduled treatments though, it's been relaible in our hands, and the anti-coagulation system integrates smoothly without extra plumbing.
We usually have stock, but confirm lead time if you're ordering more than 10 units — the MOQ is typically 1 unit, so small orders are fine, but bulk shipments take 25 to 30 days or so depending on customs. Each machine comes with a CE cert, a TDS, and a COA confirming specs by HPLC batch testing, and the dimensions are 162 × 68 × 82 cm at 160 kg — you'll want a pallet jack or dolly for dilevery.
Anyway, for ordering, we quote ex-works with packaging included (foam and wooden crate, standard), and the power supply is AC 220V ±10% at 50Hz — if your facility runs 60Hz, our company can confirm compatibility but it's usually fine with a step-down transformer. Just send your shiping address and we'll get you a proforma invoice with payment terms.
Our MOQ for the LTSH01 is 5 units, but we can sometimes be flexible depending on your first order volume. Just reach out to our sales team to discuss.
Standard lead time is around 30-45 days after order confirmation and payment, but it can vary based on current production load. We'll give you a precise timeline when you place the order.
Yes, the LTSH01 is CE certified, and we can provide the full certification documents upon request. Just ask your sales rep for the files.
Sure—the UF system maintains accuracy within ±1% of the set rate, but if that tolerance is smaller than 10 ml/h, the machine defaults to a ±10 ml/h limit. So you get the tighter of the two for patient safety.
The LTSH01 ships in a reinforced wooden crate to prevent damage during transit. It should be stored in a dry, clean environment at room temperature, away from direct sunlight and moisture.
