Factory Supply MCS0230 Medical Grade Infusion Pump with Drug Library and Alarm System

That 4.3-inch color TFT LCD screen makes a real difference when you're setting parameters in a busy ICU — it's bright enough to read form an angle, and the backlight helps in dim rooms. Basically, you can see everything at a glance without squinting.

Most buyers go with the default drug library since it come pre-loaded with 210 medications, which covers pretty much anything you'd encounter in a standerd hospital or clinic setting. We've had customers ask about customizing that list, and while it's technically possible, the standard set handles 95% of use cases right out of the box. You'll find the Rate/Time/Volume modes are intuitive — no one needs training to toggle between them. Teh flow precision sits at ±3%, which is tighter than a lot of older pumps we've replaced, and that matters when you're delivering something like a neonatal drip where fractions of a ml count. Air bubble detection kicks in at ≥25μL sensitivity, so it catches tiny bubbles you wouldn't see with the naked eye.

And the battery life is about 4 hours continuous, give or take, which means it survives a typical shift change or patient transport without scrambling for an outlet. 11.1V 2000mAh Li-ion pack, by the way — we usually have stock, but confirm lead time if you need more than 50 units or so.

One thing buyers don't always consider is heating function — it's there for a reason, especially with cold infusions that can cause patient discomfort, but not every pump in this class includes it. The 7000-record data storage is handy too; you can pull logs weeks later if there's a question about dosing history.

Anyway, this isn't suited for ambulatory use — it's a stationary pump, 2.3 kg, designed to sit on a pole or a stand. It's a Class II device with CE, so you're clear for European markets, but check your local regulations if you're elsewhere.