Account
Inquiry
You’ve probably been sourcing dialysis equipement for a while, and if you're looking at this blood pump, you already know the importance of reliability in renal care—we've been supplying these to clinics and hospitals for years, so we’ve heard all the common questions. Basically, it handles flow rates form 0 up to 999ml/min, which covers pretty much any standard hemodialysis session you’d run, and the pressure monitoring sits between 86 and 106kPa—that range is tighter than some older models we’ve seen out there. It’s not suited for pediatric cases without additional setup, though, so keep that in mind if your buyers are treating smaller patients.
Most buyers ask about the safety alarms first—there’s air detection, pressure monitoring, and power failure alerts, which are standdard for this class, but what sets it apart is how quickly the system responds to a drop in line pressure, typically within a second or so. The digital LCD display is clear enough for a busy clinic floor, and the dimensions are 245×165×285mm at 6kg, so it’s light enough to move between stations if needed. You’ll want to check your local votage before ordering—we support AC 100-240V, 50/60Hz, but some facilities still run older transformers that need a quick adapter.
Anyway, when you place an order for a bulk run, we usually have stock for quantities of 50 units or less, but beyond that, lead time is about 20 days or so—give or take depending on shipping routes. We pack each unit with a standard power cable and a user manual, and you’ll get a COA with the lot, though we recommend verifying the calibration yourself if you’re setting up a new clinic. One thing buyers don’t always think about is the operating temperature range of 10-40°C, which means it’s fine for most indoor settings but can struggle in unheated storage below 0°C.
Altitude is another spec that trips people up—it’s ≤2000m, so if your buyers are in high-altitude regions like Denver or La Paz, we’d suggest testing a sample first because teh pump performance can shift above that threshold. storage temperature tolerance is wider (-20-55°C), but we always advise keeping it in a humidity-controlled area within 30-75% relative humidity to avoid condensation on the circuit board. We’ve had one buyer who ignored that and ended up with corrosion issues after three months—just a fact of life with electronics like these.
As for pricing, we can quote per unit for a 100-piece order or adjust for smaller MOQs—usually 10 units minimum—but the per-piece cost drops noticeably once you hit 50 units. The CE and ISO13485 certifications are current, and we can provide copies of both if your compliance team needs them before ordering. Also, you might want to ask about packaging options—we standard ship in foam-lined cardboard, but some buyers request custom labeling for their hospital network, which we can do with a small lead time adjustment.
It has CE and ISO13485 certifications, so it meets European medical device standards and quality management requirements for manufacturing.
We typically require a minimum order of 10 units per shipment, but we can discuss smaller trial orders if you're just getting started.
Standard lead time is around 15-20 working days after order confirmation and payment, depending on current stock levels.
Yes, the flow rate is adjustable from 0 to 999 ml/min using the digital LCD controls, so you can fine-tune it as needed during a session.
It has alarms for air detection, pressure changes outside the 86-106 kPa range, and power failure, so you'll be alerted to any issues immediately.
