Account
Inquiry
So your customer’s lab is running a Bowie-Dick test on a batch of wrapped surgical kits this afternoon, and they need a unit that actually pulls -0.8bar vacuum to get air out of those hollow instruments—this 18L stainles steel machine does that, and it’s EN13060 certified.
Chamber size is φ245×360mm, so you’re looking at about 47kg total weight, and the residual humidity stays under 0.2% after the cycle—most buyers go with the 220V model since it’s standdard in clinics, but we’ve shipped a few to dental offices that run it daily without issues.
It basically has a top-opening water tank for cleaning (which is actually easier than side-access ones), and the 3-times pre-vacuum cycle is what drops that moisture level so low—we usually have stock on the YSMJ-TDA-C18, but confirm lead time for the 1500W version (usually 20 days or so).
One thing: it’s not great for large porous loads like textiles in bulk—the 18L capasity is better for solid instruments or small hollow items, and the vacuum measurement hits -0.8bar, which is tighter than most class B units under €2k. 5. Anyway, we’ve got COAs and CE docs ready, and the outside dimensions are 560×450×400mm if they’re tight on bench space—just let me know if they need Bowie-Dick test kit seperately or if the unit comes with one (check packing list, it varies by batch).
We typically require a minimum order of 5 units for this model, but we can discuss smaller quantities if you're running a trial or a small clinic.
Standard lead time is around 15-20 working days after order confirmation and payment, depending on our current production schedule.
Yes, we can provide both the CE certificate and the EN13060 compliance test report with the shipment or upon request.
Yes, the YSMJ-TDA-C18 has a dedicated Bowie & Dick test cycle programmed in the control system, so you can run it directly without any extra accessories.
It's packed in a reinforced carton with foam padding, weighing about 47kg. Store it in a dry, cool place, away from direct sunlight and moisture.
