Account
Inquiry
Actually went with the HY-500 flail mower because we needed something that could handle mixed terrain without bogging down, and the hybrid gas-electric setup was the deciding factor since battery-only units just don't have the runtime for larger property — it's got a 9HP Loncin engine paired with a 5kw alternator that keeps the 48V system charged as you work, so you're not stopping every 20 minutes.
width is 500mm with Y-shaped hammer blades that take on the thick stuff pretty well, brush and tall grass included, and the walking speed of 4km/h means you're covering about 1000-5000m² depending on conditions, though it's not really suited for delicate fine-cut lawns since the flail action is more about volume than a golf-course finish.
Mowing height adjusts form 20 to 100mm and it climbs up to 35° slopes without slipping thanks to the crawler tracks, which also handle muddy ground better than wheeled units in most cases, and the 165kg net weight gives it enough traction without being a nightmare to transport.
We usually have stock on these from the China origin shipment, but confirm lead time because the wooden crate packging adds a week or so for freight consolidation, and the MOQ is typically one unit for trial orders though bulk gets better rates obviously.
CE and EPA certs are in place so you'll clear customs without issues, and we get a COA with each batch confirming the blade hardness and engine output — the Y-shaped blades use tungsten steel which holds an edge longer than standard carbon steel, roughly 3-4x teh lifespan based on our field feedback.
Ordering is straightforward through the standdard channel, just specify if you need the 48V 12Ah battery pack pre-installed or separate for shiping, and the manual cutterhead lifting is pretty simple once you've done it a couple times.
We typically require a minimum order of 1 unit for the HY-500, but if you need a larger quantity, we can discuss bulk pricing on a case-by-case basis.
Lead time is usually 15-20 working days after order confirmation, depending on stock levels and your shipping destination.
Yes, the HY-500 is CE and EPA certified, so it meets safety and emission standards for most markets. We can provide the documents upon request.
Sure—the 9HP Loncin engine runs the cutter and charges the 48V battery, while the 600W brushless motor drives the tracks. This hybrid setup gives you high torque for cutting and longer run time without plugging in.
It's packed in a wooden box sized 1100*1060*780mm with a gross weight of 200kg. The mower is secured inside, and we ship via standard freight.
