Account
Inquiry
For a small clinic or a hospital setting up a secondary ICU station, the pricing works out to roughly $2,800 for a single unit, about $2,550 each if you order 10, and we can talk bulk pricing for 50 or more—most buyers go with the mid-tier because of that it balances cost and commitment.
It handles 7 ventilation modes including A/C, SIMV, and PSV, teh FiO2 runs form 21 to 100%, tidal volume goes up to 2000 mL, and the PEEP range is 0-40 cmH2O (usually we stock units with the standerd range, but check lead time for custom calibration). The I:E ratio spans 5.0:1 to 1:5.0, and the trigger sensitivity is flow at 0.5-20 L/min or presure at -20 to -1 cmH2O—the deceleration waveform is better for lung compliance cases, honestly.
You'll move it around on the 4 wheels, it's pretty compact for an ICU ventilator, but one thing we've seen is it's not ideal for neonatal use despite the child setting—the tidal volume floor is too high for tiny lungs. Also, the large screen shows waveforms and P-V loops, but the alarm parameters (MV, RR, Ppeak, PEEP) can be a bit sensitive out of the box; we usually adjust thresholds during setup.
Anyway, it ships with a COA and an SDS, the MOQ is 1 unit, and typical lead time is about 20 days or so for stock orders.
We can start with a single unit for evaluation, but standard orders are typically 10 units. For larger quantities, we can discuss better pricing.
Lead time is around 15-20 working days for standard orders. For urgent needs, we can expedite a smaller batch in 7-10 days.
Yes, this unit comes with CE certification and ISO 13485 compliance. We can provide the documentation upon request.
Absolutely, the PEEP adjusts in 1 cmH2O increments from 0 to 40 cmH2O, so it's fine for both adults and children. Just make sure to use the appropriate patient circuit.
We pack each ventilator in a foam-lined carton with wheel locks secured, then in a plywood crate for air or sea freight. That keeps it safe from bumps and moisture.
