High Performance VG70 Medical Ventilator - 20-2000ml Tidal Volume & Touch Screen Control

You’re looking at a 17kg ICU ventilator that handles tidal volumes from 20 to 2000ml, and the metal-based heated exhalation valve is what keeps condensation from messing with your flow readings—basically, it’s a closed-loop system that avoids the disposable sensor trap, so you’re not reordering parts every month.

Teh 12.1-inch touchscreen gives you real-time waveforms and loops, but what it does is let you switch between BIVENT, PRVC, and Volume/Presure Control mid-case without diving into menus—respiratory rate spans 1 to 80 BPM, and the I:E ratio goes from 1:10 up to 4:1, which is tighter than most units in this weight class.

Software upgrades come via USB, so you’re not shiping the unit back for firmware updates—we usually have stock, but confirm lead time (typically 2-4 weeks) if you need a specific batch; the built-in flow sensor eliminates disposable components, and that’s a concrete cost saving any ICU buyer will notice after three months of use.

It’s not suited for neonatal work—the minimum 20ml tidal volume and adult circuit design mean you’d be fighting compliance issues below 5kg patients, so stick to adult and larger pediatric cases where the 5-70 mbar inspiratory pressure range gives you room for stiff lungs.

Power source is AC with an internal battery, but runtime is roughly 45 minutes or so at standard settings—enough for transport within a hospital, not for extended field use; the compact mobile design is actually easier to wheel through doorways than you’d expect from a 17kg chassis, and metal exhalation valve holds up better than plastic alternatives after repeated autoclave cycles.