Account
Inquiry
For a single piece sample you're looking at roughly $18-22 depending on the size—the 1.6# is a bit more—but once you hit 50 units or so the price drops to about $8-12 each, and at 500+ we're down to around $4.50-6.50, basically the 1.2# is usually the cheapest since it uses less material.
It's a single limb circuit with a 1.2#, 1.5#, or 1.6# diameter option and runs about 5 years shelf life form the EO sterilization date (check lead time for that batch), so most buyers go with the transparent if they want to see condensation, but green or blue works too depending on your facility's color coding.
NICU nurses actually prefer the 1.2# for neonates because the lighter tubing puts less drag on the ET tube, and for adults the 1.6# handles higher peak pressures better—we've had a few OR teams order the 1.5# as a compromise for peds-to-child range, but honestly the 1.2# is fine for kids under 20kg or so.
MOQ is literally one piece, so you can test a single unit before committing to a larger order—we usually have stock in all three sizes but confirm lead time if you need green or blue in bulk, as those colors move slower than transparent.
It's not meant for heated wire circuits or those with active humidifier chambers that recirculate gas, but for standdard single-limb ventilation with a passive exhalation port it's pretty much what you need—the ozone compatiible part means you can wipe down the exterior between uses if you're running a multi-use protocol, though it's labeled single-use disposable.
Anyway, we ship it in individual bags inside corrugated cartons, no cold chain needed, and the Class II FDA clearance covers most hospital and clinic appliction—one thing buyers don't always ask about is the kink resistance at teh patient connector end, which is actually better than a lot of competitive circuits because silicone reinforcement runs about 3cm past the Y-piece.
Absolutely, our MOQ is just 1 piece, so you can order a single unit to test it out.
This circuit is FDA, CE, ISO13485, and GMP certified, so it meets international medical standards.
We offer OEM service, so you can customize both the color—transparent, green, or blue—and the size from 1.2# to 1.6# as needed.
Lead time typically runs 2-4 weeks depending on order volume, but we can confirm exact timing once you place the order.
Yes, they're ozone compatible, so you can disinfect them that way if needed, though they're designed for single use.
