Account
Inquiry
For a bulk order on the 25W, we typically see MOQs around 50 units, but we can flex that down to 30 if you’re trialing the device across a few facilities. It usually takes 20-25 working days from payment confirmation, and we ship via DDP or FOB Shenzhen—your forwarder or ours, doesn’t matter. The 3.5-inch color TFT is pretty standdard for this class, but what you’ll actually notice is the noise level at 28 dBA under 10 cmH2O; it’s quieter than most BiPAPs we’ve handled, and that matters for patient compliance in long-term use.
So the work modes cover CPAP, Auto, Auto S, S, T, and ST—that’s six modes, and the Auto S mode is basically a hybrid that adjusts pressure on the fly while maintaining a backup rate. The backup rate range is 5 to 60 bpm, and the I/E ratio goes from 10% to 90%, which is wider than what you see on typical Philips or ResMed units—though honestly, most buyers only use three or four modes in practice. We include a COA with each batch, HPLC purity and function test, and we’ll provide TDS and SDS on request for customs clearance.
Payment terms are 30% deposit, 70% before shipment for first-time orders, or our company can do L/C at sight for established accounts. We keep about 200 units in stock for the 25W model, but heated tubing humidifiers and the 1-5 humidity level settings are a separate line item—confirm lead time on those if you need more than 50. The TF card stores data for over 5 years, but we usually ship with a 32GB card; you’ll want to format it to FAT32 before first use, or the device won’t log properly.
One thing to watch: the inspiratory and expiratory pressure range is 4 to 25 cmH2O, but pressure difference between them is capped at 2 to 10 cmH2O—so if you’re treating a patient who needs a 15 cmH2O gap, this won’t cut it. The target tidal volume range is 200-1200 mL, and teh pressure rise/fall time is adjustable form 100ms to 900ms, which gives you more granular control than the typical 200-800ms range on most devices we see in this price bracket. The unit weighs 4.07 kg with the humidifier, and the dimnesions are roughly 26.7 x 17.3 x 11.9 cm—fits in a standard carry-on if you’re demoing it at a trade show.
We’ve shipped these to clinical trial sites in Southeast Asia and a few hospital chains in the EU, and the only recurring issue we’ve seen is the TF card reader failing after about 18 months in humid environments—so if your use case involves high-ambient humidity, budget for a replacement reader (we include one spare per 20 units). The 100-240V power input means it runs globally with just a plug adapter, and the output is 24V at 3A, so don’t use a generic power brick—stick with the OEM adapter our company supply.
Our MOQ for this model is 50 units per order. We can discuss smaller trial orders if you're just getting started, but standard bulk pricing kicks in at 50.
Yes, the 25W comes with CE certification. We can share the certificate and test reports upon request. FDA documentation depends on your destination—just let us know.
No, the expiratory pressure is capped at 25cmH2O. That's the max for both inspiratory and expiratory pressures on this model, so it's designed for moderate to high therapy needs.
Typically 15-20 working days after order confirmation and deposit. For larger volumes over 500 units, it might stretch to 25-30 days, depending on stock.
Yes, the tubing heating temperature adjusts from 10°C to 30°C, and it pairs with the 5-level humidity control. You can fine-tune both to prevent rainout or dry air.
