Account
Inquiry
Each mattress that goes out has a COA attached, and we back that up with batch-specific documentation if you need it for your own records. What it does is redistribute pressure every few minutes—so air cells under the patient alternately inflate and deflate, and that shift prevents the tissue damage that leads to bedsores in the first place. Most buyers use these for long-term care or home health setups where you can't turn someone every two hours.
The pump runs quietly enough that family members usually don't notice it after the first night. It's meant for continuous 24/7 operation, and the noise level sits roughly between a desktop fan and a refrigerator hum. We've had facilities run them for six months straight with no issues beyond the occasional filter check. And the Boston valve setup is just a quarter-turn—inflates or deflates the whole mattress in about 90 seconds.
Fire-retardant PVC is teh main material here, medical grade, with a tensile strength that holds up under daily cleaning. Dimensions are 195×90×10cm, which fits most standard hospital beds and home care frames. Weight capacty runs 120 to 130 kg give or take. The alternating bubble design has 130 cells or so, and they cycle in sets so no single zone stays compressed. For pressrue relief on a 70 kg patient, you'd dial it down—too firm and you lose the benefit. Also, the hook on the foot end secures the pump, so it's not sliding off the bed frame.
We ship these with the pump included, all in one box that's 32.5×15×30.5cm. The product weight is actually 3.5kg for the mattress alone (the 35kg in some listings is a typo—that's the crate for a pallet). Payment terms are typically T/T, and we accept 30% deposit with the balance before shipment. MOQ is 50 units for OEM logos or spec changes like a different connector size. For standard units, we usually have stock within 3 working days, but confirm lead time if you need over 200 pieces.
This isn't suited for alternating-low-air-loss therapy—that's a different pump system and mattress core entirely. But for basic bedsore prevention in a 1- to 2-year replacement cycle, it's better than foam alternatives because you can actually adjust the pressure. What buyers sometimes don't expect is the inflated height: 10cm fully pumped, which lifts the patient enough for turning and cleaning access. One thing—the hose connecting pump to mattress sometimes kinks if you pin it under the bed rail, so leave a little slack.
We can work with fairly small MOQs for OEM orders—typically around 50 pieces to start, but feel free to reach out if you need less.
Lead time is usually 15-20 days for stock orders, depending on volume. Custom runs with your logo or specs might add a few extra days.
Yes, we include copies of our CE and ISO13485 certifications with every order. Just let your sales contact know if you need them in a specific format.
Absolutely, the alternating bubbles inflate and deflate in cycles to shift pressure points, and the mattress supports 120-130kg safely. It's designed for continuous 24/7 use even at the higher end of that range.
The mattress folds down to a compact 32.5×15×30.5cm package, and the pump is included inside that same box. It's easy to store or ship out.
