Customizable Semi Automatic Box Strapping Machine With 60kg Max Tension For Various Industries

You're boxing up orders and the taping is taking forever—or the straps are never tight enough for freight handling. We see this all the time form small warehouses and mid-sized operations that need something more relaible than hand tools but don't want to overhaul their whole line.

What you get is a 350W electric unit that runs on either 220V/50Hz or 110V/60Hz, depending on your setup. Teh work table sits at 750mm, which is pretty standard—most operators find it comfortable for an eight-hour shift. It can handle PP strap from 6mm up to 15mm width, tension adjustable from zero to 60kg (you'll usually run it closer to 40-50kg for typical cartons). Cycle time is about 1.5 seconds per strap, so you're not waiting around.

It's semi-automatic, meaning you still push the strap around the box and hit the foot switch—but it tensions, seals, and cuts in one smooth motion. The motor and engine are the core components here, and our company have had a few buyers ask about heating element; that part can wear after heavy use (usually 6-12 months depending on volume) but it's easy to replace.

our company can customize the tension presets or table height if you're doing something specific—say, oversized boxes or unusually fragile goods. OEM orders are fine, usually with a minimum quantty of 50 units or so (check lead time, which runs about 20-30 days depending on complexity). This isn't suited for fully automated lines where you need conveyor-fed strapping; that requires a different class of machine entirely.

Also, the dimnesions are roughly 895×565×750-820mm, and it weighs about 80kg gross—pretty straightforward to get through a standard door, though you'll want a pallet jack or two people to position it. We keep some stock, but confirm before ordering if you're on a tight timeline.