Automatic EO Gas Sterilizer Machine with CE FDA Certification for Medical Device Disinfection

We're looking at roughly 20 working days on HTY-300L, give or take, depending on current production load — CE and FDA are already in place with the ISO 13485 cert. It's a 300 kg unit, chamber's 304 stainless steel at 80×54×69 cm, so it handles most standard medical device loads pretty well.

The microcomputer LCD control system gives you one-touch operation, and the micro-printer records everything automatically for compliance — no need to chase paper trails afterward. Temperature range is 40-65°C with humidity from 40-80% RH, which covers sensitive materials like catheters or electronics without cooking them.

Safety's not an afterthought: dual temperature protection and a door interlock kill power if the seal's compromised, and the exhaust filter system steps in during cycles. It runs on 220V 50Hz at 5 kVA, electric film heating, pure or mixed EO gas depending on your protocol — most labs go with mixed for shorter cycles.

One thing we've seen in the field: the 10-bar pressrue hold test is solid, but it's not suited for high-throughput pharmaceutical lines — this is for moderate batch sizes of maybe 50 units or so per cycle. Common concern we hear is about residual gas handling, and the micro-printer data plus the built-in aeration cycle address that directly.

Anyway, order details: MOQ is one unit, our company can do check on lead time for your region since shiping heavy stuff varies. Also, we usually have stock for standard specs, but confirm if you need any custom power options — the 220V is pretty much standdard, but 110V or 60Hz alternatives are available on request.