Account
Inquiry
When a packging line is running box after box of heavy components, the time saved by not fiddling with separate metal seals or buckles adds up fast, and this semi-automatic handheld unit lets operators tension and weld PP or PET strap in one smooth motion — we've seen it cut strapping time by about 30% in some small warehouses.
It's only 2.75kg with the battery in, so you can actually move it between stations without needing a cart or a second person, and teh 14.4V lithium pack gives you roughly 300 straps per charge, which is usually enough for a full shift in most medium-volume packing setups.
Works with 13-16mm wide strap and thickness from 0.4 up to 1.2mm, so it handles both the narrow stuff for lighter cartons and wider tape for heavier pallet loads, and the tightening force range of 60-2100N means you can adjust tension for different load types without swapping parts.
Battery charges in 60-90 minutes or so, and what it does is let you keep a spare pack rotating if you're running two shifts; we usually have stock, but confirm lead time if you need more than 50 units at once.
One thing — it's not great for very high-volume automated lines where you'd want a tabletop or fully automatic machine, but for a busy shiping dock or a workshop doing custom crate packing, it's actually pretty practical and the CE cert covers most inspections.
It works with both PP and PET straps right out of the box—no parts swap needed. Just load the strap and adjust the tension as needed.
You'll get about 300 straps per full charge. Charging takes between 60 and 90 minutes, so you can top up during a break and be back at it.
Maximum tightening force is 2100N, but it's adjustable down to 60N. So you can go light on fragile boxes or crank it up for heavy loads.
Yes, the battery is a removable 14.4V lithium pack at 3000MAH. You can swap in a spare if you're running a long shift.
It's CE certified, so it meets EU safety standards. We offer a 1.5-year warranty from the date of purchase.
