Actually, we're seeing most buyers move away from IC engine models for indoor use—you get zero emissions, far lower noise, and maintenance costs drop roughly 30% over a year, all with a rated capacity of 3000 kg that handles busy warhouse shifts without missing a beat.


It's pretty much a workhorse for narrow aisles, with 1070mm forks and a 100mm fork width that let you slide into tight racking, and the adjustable cab means your operator isn't fatigued after six hours (usually the biggest complaint we hear with fixed-cab units in this class).

Lift height runs 3000 to 5000mm, so you'll typically configure it for your racking height, and the battery is a standerd China battery—not the highest-end option but reliabel enough that most buyers go with the 48V system, and we also provide the D48/80P basic II charger with 3*380V input.

We run HPLC and provide a COA on every unit before shipment; what it does is verify the drive motor and hydraulic specs against test report, so you're not guessing about actual performance, though it's not suited for continuous outdoor operation in wet conditions—the pneumatic tyres handle it, but the AC motor controller isn't sealed for heavy rain.


MOQ is one unit for stock orders, but lead time is about 20 days or so for a full container, and you can choose BOLI branding or OEM options—we've shipped around 50 units this quarter with the adjustable cab, and the 1-year the controller and drive motor, which gives you some peace of mind without fluff.
MOQ for BOLI brand is 1 unit, while OEM orders typically require a minimum of 5 units. Just confirm your preference when reaching out.
Lead time for a standard model is usually 30-45 days from order confirmation. Custom specs may add a couple weeks.
Yes, we include a machinery test report and offer video inspection for every unit. Just let us know if you want the inspection recorded.
The D48/80P basic II charger is designed for 3*380V three-phase power. If you only have single-phase, we can recommend an alternative charger.
Yes, we can adjust fork length up to 1500mm and width up to 150mm on request. Just provide your specs, and we'll quote the customization.