Account
Inquiry
We've got about 40 units in stock right now, lead time is roughly 10-12 working days, and it ships standard freight — no cold chain needed since it's just the unit itself, no liquids or biologicals.
So a clinic or small lab would load up their glass media bottles or surgical dressings, set timer anywhere from 5 to 60 minutes, and the automatic shut-off with that audible alert basically tells them when it's done — pretty straightforward.
The hand wheel quick-open door is actually easier to handle than teh screw-type on older models, and the double scale presure gauge gives you both MPa and kg/cm² readings at a glance.
It's not meant for anything with sealed containers or large volumes of liquid — you'll get better results with a larger floor model for that, but for 2L or 3L glass bottles it works fine.
You'll want 220V power at 2Kw, and the working temp range is 105-126°C with a max safety pressure of 0.165 MPa, so it's good for most standerd sterilization cycles we see in medical settings.
We usually have the CE and ISO13485 docs on hand, but confirm lead time if you need the COA bundled with the shipment — sometimes that adds a day or two.
Our MOQ is typically 10 units, but we can discuss smaller orders depending on stock availability.
Yes, we include copies of the CE and ISO13485 certificates with every order, no extra charge.
Absolutely, the working range goes from 105 to 126°C, so 121°C is no problem. Just dial it in on the controller.
Lead time is usually 15-20 working days from order confirmation, depending on current production load.
Yes, it's a hand wheel quick-open design—just a few turns and you're in. No tools needed, and it seals tight every time.
