High Quality European Class B Standard Dental Autoclave Sterilizer 23L Capacity

we've been getting queries lately specifically for the 23L class B units, and the 23-II(N) seems to be what most clinics settle on once they look past the larger 35L models — that extra chamber volume means longer cycle times and more water waste, which isn't always neccessary. the 304 stainless steel chamber is pretty standard at this price point, but the real differentiator here is the drying performance, residual humidity below 0.2% which is better than reagent grade for this.

operating temperature is either 121°C or 134°C depending on what you're running, and we usually stock both votage options since the unit accepts AC 220V/110V ±10% on the same model, though you'll want to double-check which plug you need before shipping. the widescreen LCD interface is intuitive enough that most techs can figure it out without a manual, and the 5-level tray system with three round trays handles most standard dental packs without cramming.

3L distiller water tank and a 3L waste tank, so you're looking at roughly two cycles before needing to refill or drain depending on your load size — some buyers actually complain this is too small for back-to-back runs, but for a single operator clinic it's fine. the vacuum drying kicks in automatically after the sterilization cycle, and that vacuum pump is the single most common failure point on these units, we usually have spare pumps in stock but confirm lead time.

safety features include a safety valve, double pressure lock, and an automatic error self-test, which basically means it won't start a cycle if something's off — we've seen labs try to run wrapped instruments in a class N cycle, which this won't allow, so that's actually a time-saver for the less experienced users. the dimensions are 740×550×500mm at 39kg, so factor in bench space and weight capacty before ordering, it's not exactly portable.

certification is ISO and CE, and we send a COA with each unit listing the batch-specific sterilization validation data, typically HPLC purity above 99.5% for the steam qualiy though that spec varies slightly between. the unit is not suited for high-throughput hospital CSSD departments that need a 60L+ autoclave — you'll be running back-to-back cycles on this every 45-50 minutes or so, which gets old fast if you've got a queue.

so for an RFQ, we'd quote roughly 1,200-1,400 euros per unit depending on the current exchange rate and whether you need the optional printer, MOQ is 5 units for direct shipment, 3 for consolidated freight. we typically ship within 20-25 working days after receiving the PO, and the 3L reservoir setup means you'll want to order a water refill kit separately if you don't already have one — that's often the detail buyers don't think to ask about until they're mid-cycle.