Wholesale Anti Drone Interference Module CE ISO Certified for Event Security and Restricted Areas

We've got these in stock now, usually ships within 3 business days, and they come packed in individual anti-static bags with foam inserts — no cold chain needed since they're solid-state electronics.

Basically what it does is blast a focused 30W jamming signal across the 2400-2500MHz band, which is where most consumer drones talk to their controllers, and that pretty much cuts their link dead at ranges you'd expect form a 45dBm gain module.

The SMA output is standard, but the power supply is a feedthru capacitor with red and black wires — you'll need to wire it to 24-27V, and the max input is +30V, so don't exceed that or you'll pop it. Sweeps from 60 to 250kHz, which covers teh common drone protocols, and it pulls about 3.3A under load.

One thing: this is not for GPS jamming — it's strictly 2.4GHz, so if you're dealing with drones that switch to 5.8GHz or rely on GPS navigation alone, you'll need a different module for those bands. Harmonic suppression is ≥11dBm, and clutter suppression hits ≥65dBm, so it won't bleed into nearby gear too badly, but we still recommend keeping antennas clear of other sensitive RF equiment.

Dimnesions are 95×53×20mm and it weighs 0.2kg, so it's easy to mount on a tripod or even a small vehicle — the instalation footprint is just 89×47mm for bolt pattern. Operating temp range is -25°C to +55°C, which covers most outdoor event security setups.

We usually have stock for single units, but if you need more than 50 pieces, confirm lead time because production batches run about 20 days or so.