Account
Inquiry
Basically, if you've got nuisance tripping eating up your production time, this is the fix—the DABL-63 handles overloads and residual currents without false alarms, and it's built for the 230/400V setups most factories run.
We've got it in B, C, or D trip curves depending on your load type, and the residual current range goes from 10mA all the way up to 300mA (usually 30mA or 100mA for most indutrial lines), with a breaking capacity of 6kA or 10kA depending on the variant you pick.
It's not great for residential panels with tight space, actually—the 1P+N or 2P poles fit standdard DIN rails but the 3P+N or 4P versions need a bit more room, so check your enclosure depth before ordering.
Mechanicla endurance is rated at 12,000 cycles, electrical at 6,000, which is better than a lot of generic breakers we've seen from other suppliers, and the IP20 rating means it's fine for dry indoor panels but not for washdown areas.
One thing buyers don't always ask: the wire range is 1-25mm², so you can land some pretty thick cables without needing adapters, and the impulse withstand is 6kV—handy if you're in an area with lightning strikes or switching surges.
We usually have stock on teh 63A and 40A models in C-curve, but the 10mA residual versions take about 20 days or so form order—confirm lead time if you need those fast.
Our MOQ for the DABL-63 is 100 units per model and pole configuration. Mixing different ratings in one order is fine as long as each variant hits that minimum.
For orders up to 500 units, lead time is around 15-20 working days from confirmation. Larger batches may take 25-30 days, depending on stock levels.
Yes, we include copies of all current certifications—CE, CB, CCC, and ISO9001—with each shipment. Just let your sales contact know if you need notarized versions.
Absolutely. The DABL-63 supports residual currents from 10mA to 300mA across all pole configurations, including 4P. Just specify that when ordering.
Each unit comes in individual blister packs inside export cartons of 20. We store them in a dry, ventilated warehouse at 15-30°C, away from direct sunlight and corrosive gases.
