Account
Inquiry
We've been using these for smaller commercail fit-outs and honestly, the PA66 housing holds up better than other breakers we've tried in damp conditions — IP20 isn't, but for a distribution board it's fine and we haven't had one crack yet.
Breaking capacty sits at 6000A which is typical for this class, but what caught my attention is the adjustable current range form 1A all the way to 63A so you can standardize on one model for most branch circuits; just swap the rating if needed.
30mA residual current is what you expect for personal protection, but check if your appliction needs a different trip sensitivity because the standard curve might not suit sensitive electronics (we had to swap one out for a lab bench once).
Mechancial life is rated at 10,000 operations or so, but we usually see them last longer than that in practice — the real limitation is the operating temperature range of -5°C to +40°C, so don't put it in an unheated attic or exterior box.
Sourcing directly means we skip distributor markup, and lead time is roughly 2 weeks for mixed pole options (1P+N through 4P) which is better than waiting for a specialty distributor to backorder.
6, we use the B-curve for general lighting circuits and C-curve for motor loads, so we keep a mix of both in stock — the CB and CE certs cover IEC60898 so inspections haven't flagged them, but give a heads-up if you need CCC compliance for export.
We typically ask for a MOQ of 50 units per pole option, but we can be flexible on the first order if you're testing the product.
For a 200-unit order, lead time is usually 10-15 working days after payment confirmation and stock check.
Yes, we include a copy of the CE certificate with every order, plus we can share the CB and CCC docs upon request.
Absolutely — the B-curve is standard for this model, and 30mA residual current is the default setting. Just specify your curve choice when ordering.
Each unit comes in an individual box, then we pack in cartons and secure them on pallets for sea or air freight. We can also add custom labels if needed.
