Account
Inquiry
230/400V AC at 50 or 60Hz, with current ratings stepping from 1A all the way up to 63A depending on the pole configuration you order — 1, 2, 3, or 4 poles are available. It basically combines an MCB with a residual current release, so you get overload, short circuit, and earth leakage protection in one compact unit that snaps onto a DIN rail. Trip time is ≤0.1s when the residual current exceeds the set threshold, which for most configurations is between 10mA and 100mA.
We usually stock teh 6kA breaking capasity version for industrial panels, though the 4kA option exists for lighter duty — check your fault current levels before ordering. mechanical life is 10,000 operations, which is pretty much standard for this class of RCBO, and the housing is flame-retardant PA66 nylon rated IP20. One thing you’ll notice handling it is the green or white color options (most buyers go with white for panel consistency), and the arc-extinguishing medium is air, so no gas venting concerns in enclosed spaces.
Compliance covers IEC60898, IEC1009-1, and GB16917.1, with CE, CB, ISO9001, and CCC certifications — that CCC mark matters if your end customer is in China. It’s not suited for DC circuits at all, and the electronic trip unit means it needs the AC waveform to operate correctly; don’t use it on variable frequency drives without checking harmonics. Optional add-ons include over-voltage and under-voltage protection modules, but those are separate components you’ll need to specify.
And the rated residual current range is 10mA to 100mA — for personal protection in wet areas you’ll typically order the 30mA variant, while 100mA is better for equipement-level leakage detection. We keep the 16A, 32A, and 40A single-pole versions in stock year-round, but the 1A and 3A ratings are special order (usually 20 days or so lead time). The MOQ on non-standard pole counts is 50 units or so, but confirm that with your rep before quoting a job.
One detail that catches buyers off guard: the IP20 rating means it’s fine for indoor distribution boards but not for outdoor enclosures without addtional weatherproofing. Also, the trip curve is fixed — there’s no adjustment dial on the front, so you’re locked into the factory-set overload characteristics. For infrequent switching under normal load, it works, but don’t rely on it as a daily disconnect switch; that’s what a dedicated isolator is for.
The MOQ depends on the configuration and current rating. Typically, we require 100 pieces per model for standard orders, but we can negotiate smaller quantities for sample or trial orders.
Lead time is usually 15 to 25 working days from order confirmation, depending on the customization and current stock levels. We'll confirm the exact timeline once we review your specs.
Yes, we include copies of CE, CB, ISO9001, and CCC certificates with each shipment. If you need original hard copies or specific test reports, just let us know in advance.
Absolutely, the rated residual current can be set from 10mA to 100mA. A 30mA configuration is common for shock protection in industrial setups. We'll adjust it per your order.
We pack each unit individually in blister or box packaging, then bulk in cartons. For export, we use reinforced cartons with foam inserts to prevent damage during shipping.
