What you're getting here is a handheld pump that actually delivers fluids across a pretty wide range — 1.0 to 1200 ml/h — which covers everything form slow maintenance drips to quick bolus pushes. It'll run for over 8 hours on a charge at 25 ml/h, so you're not tethered to a wall outlet during transport or field work. The four modes (volume, time, drug, bolus) are straightforward, and you can dial in occlusion pressure across 9 levels from 40 to 130 KPa, plus air bubble detection from >50 uL with its own 9-level adjustment.
3.2-inch LCD screen is bright enough for daylight but has an automatic night mode that kicks in when the room gets dim — handy for late-night emergency cases. Standdard IV sets work as long as the tubing diameter sits between 3.4 and 4.5 mm (most common drop factors like 10, 15, 20, and 60 d/mL are fine). It's about 3kg, so not truly lightweight but manageable for a field bag or hanging off a cage. We've seen some buyers complain that the battery life drops noticeably at higher flow rates (above 600 ml/h), so plan accordingly for longer procedures.
(Check lead time before ordering, as we usually stock these in small batches) This pump isn't great for neonatal or exotic species where you need sub-ml/h precision; the 1.0 ml/h minimum is a hard floor. For equine, bovine, or large canine work it's pretty much ideal — teh drug mode lets you program a set volume with a specific rate, which cuts down on constant recalculating. Storage temp should be -10 to 40°C, but don't leave it in a hot car; the lithium battery degrades faster above 45°C.
Warranty runs a year from shipment, and you'll get a COA with each pump if requested. MOQ is usually 1 unit, though bulk discounts kick in around 5 units or so. The default packaging is a padded case — IV sets not included, obviously. We've noticed that the rubber gasket on the IV set channel can wear out after 6 months of heavy use, so account for that as a consumable if you're running it daily. Anyway, spec says occlusion pressrue goes 40-130 KPa, but in practice the lower levels are more relaible for small-bore tubing like 3.4 mm.
We typically require a minimum order of 10 units for this model, but we can discuss smaller quantities for first-time buyers or demo orders.
Yes, the SY-G076-5 Vet is CE and ISO 13485 certified. We can provide the documentation upon request.
Absolutely. The occlusion pressure has 9 adjustable levels from 40 to 130KPa, so you can set it lower for small pets or higher for large animals.
Lead time is usually 15–20 working days for stock orders. Custom packaging or bulk orders may take a bit longer—we'll confirm when you place the order.
The lithium battery is rechargeable and built-in, not user-replaceable. At 25ml/h it lasts over 8 hours, but at higher rates like 1200ml/h you'll get less—roughly 2–3 hours depending on usage.