Account
Inquiry
Most buyers ordering the 15-piece set go with detachable head option for hip cases, as it lets them swap between 7.2mm and 14.0mm in 0.5mm increments without pulling the whole shaft—pretty handy during a knee replacement where you’re switching sizes quickly.
We usually stock the RJ1025 in bulk, but lead time is about 20 working days or so for a full pallet; we’ve had some clients ask for a single set with COAs and the CE mark, and that ships faster, typically within a week if teh batch isn’t tied up in sterilization validation.
It basically cuts down on OR noise—≤63dB at 50Hz—so surgeons aren’t dealing with that high-pitch whine during long procedures, and the 450mm length covers both femoral and acetabular work without needing a separate flexible reamer or drill bit.
The medical-grade stainles steel handles autoclaving up to 135°C, but honestly, for high-volume ORs running multiple cycles daily, we recommend checking the head locking mechanism after roughly 150 uses because of that it can loosen slightly (usually not an issue for smaller hospitals).
One thing buyers often miss: the set isn’t ideal for pediatric cases where you’d need sub-7mm diameters, and the fixed-head option works better for knee surgeries where you don’t want any play in the reamer—just something to factor when ordering.
We require a minimum order of 10 sets per order for this model. That's 150 pieces total, giving you a full range of diameters from 7.2mm to 14.0mm in each set.
Yes, absolutely. We include copies of both CE and ISO13485 certificates with every order. Just let us know if you need them in a specific format or language.
The 450mm length is standard across the entire set, from the 7.2mm to the 14.0mm bits. No variation—each piece is precision-ground to that exact length.
We offer both detachable and fixed head options. You can choose either configuration when placing your order. The detachable heads are quick-release for swapping during surgery.
Autoclave at 135°C max, standard cycle. We suggest a 20-minute steam exposure at that temp. The stainless steel handles repeated sterilization without corrosion.
