Account
Inquiry
Actually, we've seen most orthopedic surgeons lean toward this system when they need something that can handle both routine and complex cases without swapping tools mid-procedure, and foot pedal control is basically what makes it in tight OR setups.
It's autoclavable up to 135°C, so you can run it through standard sterilization cycles without worrying about material fatigue—the medical-grade stainles steel holds up well, though the 13.5 kg weight is something you'll notice if you're used to lighter bone saws.
No-load speed goes from 0 to 40,000 r/min, and the rated torque is 125 gcm, which is better for controlled drilling than most units in this class; the max drilling diameter is 4.3 mm, so it's not suited for large-bore appliction like screw pilot holes above that size.
Straight and angled attachments come in the kit, and we usually have stock on those, but confirm lead time for the angled one—it's about 20 days or so form order. Also, the noise level stays at or below 63 dB(A), which is quieter than some floor models we've handled.
Input voltage is AC 220V, 50Hz, so double-check your local power before ordering; we've had buyers in 110V regions need a step-down transformer, and that's a detail most don't think to ask about upfront.
Our standard MOQ is 10 units, but we can discuss smaller orders for first-time buyers or sample requests.
We include CE and ISO13485 certificates with every shipment. If you need additional documentation for your local regulatory body, just let us know.
No, this model is designed for AC 220V, 50Hz. We don't have a 110V version yet, so you'd need a voltage converter for other regions.
Autoclaving at 135°C usually takes about 20–30 minutes for the stainless steel parts. Just make sure to cool them down fully before reuse.
Both attachments come included in the package, so you get the straight and angled handpieces right out of the box.
