Account
Inquiry
It's not a heavy-duty indutrial wrapper for pallet-sized loads—the frame only handles packages up to 470x200mm, so you're looking at smaller cartons, bundles of printed materials, or lightweight parts rather than bulk freight.
But for those mid-sized jobs, the adjustable tightening force from 5 to 50N actually gives you more control than most banders in this class; we've seen buyers use teh low end for soft paper products and crank it up for bundled cardboard or kraft paper packs.
Strapping speed runs about 20 pieces per minute, which is fine for a single operator line, and hot melt bonding method means no metal clips or seals to worry about—just a clean fusion joint that holds well on OPP film bands or paper strapping.
It's built with a stainles steel structure, weighs 35kg, and draws 800W on 220V or 110V (50/60Hz), so you'll need to confirm your power setup, but we usually have stock on the common voltage versions.
One thing a buyer might not think to ask: the photoelectric switch triggers automatically on manual mode too, not just fully automatic, which saves you from having to hit a foot pedal every cycle.
Lead time is typically 2-3 weeks, give or take, and each unit ships with a 1-year warranty plus CE and ISO9001 certs—just specify whether you need 20mm or 30mm strap width when ordering.
Yes, it works with both 20mm and 30mm strap widths. No extra parts needed—just set it for the width you're using.
For factory direct orders, MOQ is typically 1 unit. But if you need a larger quantity, we can discuss bulk pricing.
Absolutely—you can dial it in between 5 and 50N using a simple knob on the machine. It's easy to adjust on the fly for different pack sizes.
Yes, we include both CE and ISO9001 certification documents with each MW-150Y shipment. Just let us know if you need them in a specific format.
It supports both manual and fully automatic modes. In automatic mode, it cycles at 20 packs per minute with no operator needed once you set the parameters.
