Account
Inquiry
Basically, it's a compact module we designed to throw a wrench in the works for drones operating in that 700-800MHz range—think of it as a targeted noise maker that sweeps across teh band to cut the link between UAV and its controller, and at 50 watts it's got enough punch for most real-world security setups.
We've been running these through tempearture cycling tests, and the low drift design means it doesn't lose its cool when things heat up; you'll see consistent sweep interference performence even after an hour of continuous use, which is better than some bulkier units we've tested in-house.
Most buyers go with the 50W option for open-area scenarios, but if you're working tighter perimeters, the 20W variant handles it fine—just check your coverage radius against our typical specs.
For ordering, we usually have stock on the 700-800MHz version, but custmized frequency ranges (200-2700MHz) add about 20 days or so to lead time—confirm your target band and we'll send a COA with the batch.
Also, the module itself is 125×60×17mm and weighs just 0.26kg, so it's easy to integrate into existing racks or portable units, though you'll want to ensure adequate heatsinking for sustained operation.
Our MOQ is typically 10 units for the 700-800MHz module, but we can negotiate lower quantities depending on your specific frequency customization needs.
Lead time runs about 15-20 working days after order confirmation, since we need to tune the frequency range and test the 50W output for your specific band.
Yes, we can provide CE and FCC test reports upon request, along with a factory QC certificate covering the low drift temperature stability specs.
The 700-800MHz band is a fixed operating range for this module, but we can customize the entire frequency range from 200 to 2700MHz if you need a different band—just let us know your target frequencies.
We ship each module in an anti-static bag with foam padding. For storage, keep it in a cool, dry place below 40°C to maintain the low drift temperature stability.
